Home | Catalog | Search | Contact Us | Login | Register | My Cart

  Nails  |   Staples  |   Hog Rings  |  Compressor - Tool Kits  |  Safety Information

Bostitch Parts Kits

  Nailers  |  Staplers  |  Hog Ring Pliers - Tools  |  Compressors

   
 

 
  Air Pin Nailers - Air Headless Pin Nails
     
  HP118K - Industrial 1 3-16 Inch  Pneumatic Headless Pin Nails
  23-Gauge Headless Pinner
 

Buy Stanley Bostitch pneumatic pin nailers and 23 gauge headless air pin nails.

 HP118K Kit Includes TU-216-2330 Pin Nailer, Pins, Carrying Case and Oil Lubricant

Buy Stanley Bostitch pneumatic pin nails and 23 gauge headless air pin nailers.Buy Stanley Bostitch pneumatic pin nails and 23 gauge headless air pin nailers.
 
Weight 2.2 lbs, 1 kilos
Driving Power60 inch lbs.
Fastener Gauge23-Gauge Headless Pin
Fastener Range1/2 Inch - 1-3/16 Inches
Power to Weight Ratio27
  • Adjustable high/low power switch
  • Over molded grip
  • Rear exhaust
  • Aluminum housing
 
     
 

Important - You and others working around you can be seriously injured by fastener driving tools if you do not follow the instructions provided on the tool and in the operations manual.  Used properly, these tools provide easy, safe and efficient methods for driving fasteners. Trigger Operation - used when the work piece contact is not practical because of the specific operation performed by the fastener driving tool.  See Safety Information!
 

 
 

Fasteners are sold in Case Quantities Only
   
 

Pneumatic 23 Gauge Headless Pins
  Item Number Length (inches)  Pin Gauge Pin Finish Pins per Box Boxes per Case Pins Fit Pin Nailers Below: Weight Per Case (lbs) Cases per Pallet Unit of Measure
  PT-2312-3M 1/2 23 Ga

Coated

 3M 60 TU-216-2330, HP118K 13.2 45 1 Case
  PT-2319-3M 3/4 23 Ga Coated 3M 60 TU-216-2330, HP118K 19.2 45 1 Case
  PT-2325-3M 1 23 Ga Coated 3M 60 TU-216-2330, HP118K 25.2 45 1 Case
  PT-2330-3M 1 3/16 23 Ga Coated 3M 60 TU-216-2330, HP118K 31.2 45 1 Case
 

Pneumatic 18 Gauge Pins - 22 Gauge Headless Pins
  Item Number Length (inches)  Pin Gauge Pin Finish Pins per Box Boxes per Case Pins Fit Pin Nailers Below: Weight Per Case (lbs) Cases per Pallet Unit of Measure
  BA-S111P110 7/16 18 Ga

Coated

 5M 22 Bea S100, BA-T520 13.2 1848 1 Case
  BA-S114P90 9/16 18 Ga Coated 5M 18 Bea S100, BA-T520 N/A 1512 1 Case
  BA-S116P80 5/8 18 Ga Coated 5M 16 Bea S100, BA-T520 N/A 1344 1 Case
  BA-S119P70 3/4 18 Ga Coated 5M 14 Bea S100, BA-T520 N/A 1176 1 Case
  BA-S122 7/8 18 Ga Coated 5M 12 Bea S100, BA-T520 N/A N/A 1 Case
  BAS-125P50 1 18 Ga Coated 5M 10 Bea S100, BA-T520 N/A 840 1 Case
  BA-S710P288 3/8 22 Ga. Coated 12M 24 Bea S700, BA-T410, TU-216-2330 N/A 2016 1 Case
  BA-S712P240 1/2 22 Ga. Coated 12M 20 Bea S700, BA-T410, TU-216-2330 N/A 1680 1 Case
  BA-S714P216 9/16 22 Ga. Coated 12M 18 Bea S700, BA-T410, TU-216-2330 N/A 1512 1 Case
  BA-S717P168 11/16 22 Ga. Coated 12M 14 Bea S700, BA-T410, TU-216-2330 N/A 1176 1 Case
   
  Information Regarding Corrosion - Steel fasteners are made from galvanized wire and not treated after fasteners are manufactured.  As such, the manufacturer does not guarantee or warranty product against corrosion for any specified time.  Zinc coatings on nails and staples can help with corrosion.  However, high humidity, salt air, acidic wood, industrial gases, installation impact, preservatives and fire retardants containing salts, can break down the Zinc coating and cause fasteners to rust.  Harsh conditions may call for special material coating or special fasteners such as aluminum or stainless steel.  Wood manufacturers may call for special or high grade galvanized fasteners which if not used void their product warrantees.  Always check the wood manufacturers' specifications beforehand to insure full compliance with their requirements.
   
     
 

Authorize.Net Merchant - Click to Verify

 Case Quantities, Box Quantities, Roll Quantities, Descriptions, Weights & Pricing are subject to change without notice.  It is our policy to make every effort to notify customers of such changes prior to shipping.  Our pricing is from time of shipment.  Any returns must be received at our warehouse within three weeks after DS Manco™ / usfasten.com™ has shipped your order from our warehouse.  To return product, you must contact us to receive a Return of Goods Authorization Number.  All returns are subject to a 25% restocking charge.  Custom orders are non-returnable.  For problems regarding this web site: contact us.  Copyright © 2009 usfasten.com™. All rights reserved.