|
Air Nails - Coil Nails |
| ||||||
| Framing Nails - Sheathing Nails | ||||||||
| Pallet Nails - Crating Nails | ||||||||
| Galvanized Coil Nails - Stainless Steel Coil Nails are here. | ||||||||
|
Pneumatic Coil Framing Nails, Sheathing Nails, Pallet Nails to fit the following Framing Air Coil Nailers: ; N130C-2 | ||||||||
| 15 degree coil siding nails to fit the following: Stanley Bostitch Siding: N50C,N55C,N57C, N63CP, N64C | ||||||||
Air Nails - Coil Nails - Heavy Duty C Series | ||||||||
For construction, furniture or industrial applications - Framing Nails, Sheathing Nails, Pallet Nails. | ||||||||
|
Galvanized Coil Nails - Stainless Steel Coil Nails are available. | ||||||||
| Click Item Number for Your Price | Length (Inches) | Points | Finish | Shank Type | Coil Nails Below Fit Bostitch Coil Nailers: |
 | ||
| C4PSTIF |
1-1/2 |
Diamond | Hardened | .099 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C6P99D |
2 |
Diamond | Coated | .099 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C6P99DG |
2 |
Diamond | Galvanized | .099 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C6R99BC |
2 |
Blunt Chisel | Coated | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C6R99BCG |
2 |
Blunt Chisel | Galvanized | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C6R99BDSS |
2 |
Blunt Diamond | Stainless Steel | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C7R99BCG |
2-1/4 |
Blunt Chisel | Galvanized | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C7PSTIF |
2-1/4 |
Diamond | Hardened | .099 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C8P99D |
2-1/2 |
Diamond | Coated | .099 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C8P99DG |
2-1/2 |
Diamond | Galvanized | .099 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C8R99BCG |
2-1/2 |
Blunt Chisel | Galvanized | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C8R99BD |
2-1/2 |
Blunt Diamond | Coated | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C8R99BDSS |
2-1/2 |
Blunt Diamond | Stainless Steel | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C8P120D |
2-1/2 |
Diamond | Coated | .120 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C8P131D |
2-1/2 |
Diamond | Coated | .131 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C10P120D |
3 |
Diamond | Coated | .120 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C10S120DG |
3 |
Diamond | Galvanized | .120 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C10P131D |
3 |
Diamond | Coated | .131 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C10R120DSS |
3 |
Diamond | Stainless Steel | .120 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C10S120DG |
3 |
Diamond | Galvanized | .120 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C10P148D | 3 |
Diamond | Coated | .148 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C12P120D |
3-1/4 |
Diamond | Coated | .120 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C12P120DG |
3-1/4 |
Diamond | Galvanized | .120 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C12R120DSS |
3-1/4 |
Diamond | Stainless Steel | .120 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C12S120DG |
3-1/4 |
Diamond | Galvanized | .120 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C12P131D |
3-1/4 |
Diamond | Coated | .131 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| C16P131D |
3-1/2 |
Diamond | Coated | .131 Smooth | N400C-1; N100C; N100CPP; N130C-2 | |||
| C16P131DG |
3-1/2 |
Diamond | Galvanized | .131 Smooth | N400C-1; N100C; N100CPP; N130C-2 | |||
| C20S120D |
4 |
Diamond | Coated | .120 Screw | N400C-1; N100C; N100CPP; N130C-2 | |||
| C20P131D |
4 |
Diamond | Coated | .131 Smooth | N400C-1; N100C; N100CPP; N130C-2 | |||
| C20P131DG |
4 |
Diamond | Galvanized | .131 Smooth | N400C-1; N100C; N100CPP; N130C-2 | |||
|
Pneumatic Coil Framing Nails, Sheathing Nails, Pallet Nails to fit the following Framing
Air Coil Nailers:;
N130C-2
| ||||||||
Air Nails - Coil Nails - Heavy Duty AC Series | ||||||||
For construction, furniture or industrial applications - Framing Nails, Sheathing Nails, Pallet Nails. | ||||||||
| Click Item Number for Your Price | Length (Inches) | Points | Finish |
Shank Type |
Coil Nails Below Fit Coil Nailers: |
 | ||
| AC4D099 |
1-1/2 |
Diamond | Coated | .099 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC4D113BDP |
1-1/2 |
Blunt Diamond | Coated | .113 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC4DR099BCP |
1-1/2 |
Blunt Chisel | Coated | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC4D113HM |
1-1/2 |
Blunt Diamond | Heat Treat Mech Galv | .113 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC5D099 |
1-3/4 |
Diamond | Coated | .099 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC6DGAL |
2 |
Blunt Diamond | Galvanized | .113 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC7D099 |
2-1/4 |
Diamond | Coated | .099 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC7DH | 2-1/4 |
Diamond | Hardened | .131 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC7DR099BCP |
2-1/4 |
Blunt Chisel | Coated | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC8DRBDP | 2-1/2 | Blunt Diamond | Coated | .099 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC8D131GAL | 2-1/2 | Diamond | Galvanized | .131 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC10DB |
3 |
Blunt Diamond | Coated | .113 Smooth | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC10DR |
3 |
Diamond | Coated | .120 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC10DSP-HT |
3 |
Diamond | Heat Treated | .120 Spiral | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC12DR |
3-1/4 |
Blunt Diamond | Coated | .120 Ring | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC12DS |
3-1/4 |
Diamond | Coated | .120 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| AC12DS131BDP |
3-1/4 |
Blunt Diamond | Coated | .131 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
|
Pneumatic
Coil Framing Nails, Sheathing Nails, Pallet Nails to fit the following Framing
Air Coil Nailers:;
N130C-2
| ||||||||
Air Nails - Coil Nails - Heavy Duty FC Pallet Plus Series | ||||||||
For construction, furniture or industrial applications - Framing Nails, Sheathing Nails, Pallet Nails. | ||||||||
| Click Item Number for Your Price | Length (Inches) | Points | Finish | Shank Type | Coil Nails Below Fit Coil Nailers: |
| ||
| FC5DS099BC-PP |
1-3/4 |
Blunt Chisel | Coated | .099 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| FC6DS099BC-PP | 2 | Blunt Chisel | Coated | .099 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| FC6DS099BD-PP | 2 | Blunt Diamond | Coated | .099 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| FC7DS099BC-PP | 2-1/4 | Blunt Chisel | Coated | .099 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| FC7DS099BD-PP | 2-1/4 | Blunt Diamond | Coated | .099 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| FC8DS099BC-PP | 2-1/2 | Blunt Chisel | Coated | .099 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
| FC8DS099BD-PP | 2-1/2 | Blunt Diamond | Coated | .099 Screw | N80CB-1; N80CB-2; N86C-1; N86C-2; N400C-1; N100C, N100CPP | |||
|
||||||||
| Important - You and others working around you can be seriously injured by fastener driving tools if you do not follow the instructions provided on the tool and in the operations manual. Used properly, these tools provide easy, safe and efficient methods for driving nails, staples & rings. Contact Trip - best suited for high volume rapid fastening where exact placement of the fastener is not important. Sequential Trip - best suited when rapid fastening is not needed or when exact fastener placement is important. Evaluate your application to determine the best trigger. See Safety Information for Trip Operation! | ||||||||
|
||||||||
| Bostitch Solutions for Changes to Pressure Treated Lumber | ||||||||
|
For many years, the industry standard wood preservative has been CCA (Chromated Copper Arsenate). Effective January 1st, 2004, the pressure treated wood industry voluntarily agreed to remove arsenic from the wood treating process. Internal and independent testing has proven that the “new” pressure treated wood formulations (Alkaline Copper Quaternary - ACQ, Copper Azole, etc.) are more corrosive to fasteners Bostitch recognizes the need to offer fastener solutions to address code official requirements, wood manufacturers recommendations, and most of all, construction professionals concerns. For the most extreme corrosive environments, stainless steel fasteners are the best recommendation. Bostitch currently offers grade 304 stainless steel fasteners in all types of collation. For fasteners used with the new pressure treated wood in less corrosive environments, Bostitch has you covered. For our full line of wire-welded stick and coil nails, Bostitch introduces THICKCOAT™ galvanization. This new technology in galvanization was designed specifically to protect against today’s more corrosive pressure treated lumber. This new coating technology uses an enhanced electro-galvanization process to apply more than 2˝ times the amount of zinc than conventional electro-plating. Coupled with this dense zinc coating is a rust-resistant chromate overcoat. AWPA E-12 laboratory testing has shown that THICKCOAT™ galvanized fasteners corrode at approximately half the rate of our leading competitors. For plastic collated round head strip nails, Bostitch offers a full line of Hot Dipped Galvanized nails. Our Hot Dipped Galvanized nails meet or exceed ASTM A153 zinc weight specification. This ensures a thick zinc coating to provide superior corrosion resistance. Bostitch continues to conduct the most extensive corrosion testing of fasteners in the industry. Our testing is conducted in accordance with the ASTM B117 or AWPA E-12 specifications. This testing is what gives us the confidence to recommend our stainless steel, Thickcoat™ galvanized and hot dipped galvanized fasteners for use in the new pressure treated wood. | ||||||||
